FAQ

18-4210-00- Parts, Protective Ring Base, Accessory, 10" Mondo Djembe
18-4220-00- Parts, Protective Ring Base, Accessory, 12" Mondo Djembe
18-4221-00- Parts, Protective Ring Base, Accessory, 14"/16"/18" Mondo Djembe
*Special order through a local or online retail store.

For best results we recommend using an air dried urethane adhesive such as Gorilla Glue and sanding the walls and bottom of the existing rubber base with a course-grit sandpaper, such as 100 or 120 grit.  This will add scratches to the surface and enable the adhesive to grip the rubber ring. After sanding, thoroughly clean the existing ring.  Dispense the adhesive on the walls and inside bottom of the new Protective Ring Base.

Press the drum in the new Protective Ring Base.  Do not lift the drum to clean the inside. Wipe off any excess glue from the outside of the drum only while it is wet. Let the drum sit, standing up on the Protective Ring Base until the glue thoroughly cures.