View the following diagram to identify the parts and reference from the parts list below. Place the special order through your local or online retail store.
(see attached mounting instructions)
ROTOTOM REPLACEMENT PARTS LIST
PARTS USED ON ALL ROTOTOM DRUMS
10-4200-09- Remo Roto Tom Label/Upper
10-4300-09- Remo Roto Tom Label/Lower
10-2101-69- Drum tension Rod, 12-24 X 2.55" Length
18-0043-50- Parts, Washer, Flat, Nylon, Black, (for tension rod)
10-3000-09- Rototom Fastening Handle
STAND/TRACK/ADAPTER OPTIONS:
ST-2000-00- Stand, ROTOTOM®, Lightweight (use for individual drums)
ST-4204-10- Stand, ROTOTOM®, 6300 Series, 4" Bar (HEAVY DUTY, FOR INDIVIDUAL)
ST-4224-10- Stand, ROTOTOM®, 6300 Series, 24" Bar (comes stock with all Roto-tom Sets)
ST-4233-10- Stand, ROTOTOM®, 6300 Series, 33" Bar
MS-0004-00- 4 In Roto Trac-Packed
MS-0010-00- 10 In Roto Trac-Packed
MS-0024-00- 24 In Roto Trac-Packed
MS-0033-00- 33 In Roto Trac-Packed
63-5266-19-RATCHET BLOCK ASSY (for ST-42xx-10 heavy duty stand. wingnut, bolt spring not included)
AD-0010-00- Plate Adapter-assembly
ROTOTOM, BLACK, 6" DIA,
10-1400-09- Rototom, 5 1/2'' Diameter, Top Casting, Black
10-1500-09- Rototom, 7 1/2'' Diameter, Bottom Casting, Black
PS-0306-00- Batter, Pinstripe, Clear, 6" Diameter
CS-0306-10- Batter, Controlled Sound, Clear 6" diam. black dot on top
TI-0306-00- Timpani, Clear 6" diam. for rototom
10-2200-19- Parts, Carriage Bolt, 3/8-16 X 7.00"
10-1870-06- Counterhoop, Batter, 6" Diameter, 4 Ears, 2.3mm Gauge, Chrome
ROTOTOM, BLACK, 8" DIA,
10-1400-19- Rototom, 7 1/2'' Diameter, Top Casting, Black
10-1500-19- Rototom, 9 1/2'' Diameter, Bottom Casting, Black
10-2200-19- Parts, Carriage Bolt, 3/8-16 X 7.00"
PS-0308-00- Batter, Pinstripe, Clear, 8" Diameter
CS-0308-10- Batter, Controlled Sound, Clear 8" diam. black dot on top
TI-0308-00- Timpani, Clear 8" diam. for rototom
10-1870-08- Counterhoop, Batter, 8" Diameter, 4 Ears, 2.3mm Gauge, Chrome
ROTOTOM, BLACK, 10" DIA.
10-1400-29- Rototom, 9 1/2'' Diameter, Top Casting, Black
10-1500-29- Rototom, 11 1/2'' Diameter, Bottom Casting, Black
10-2200-19- Parts, Carriage Bolt, 3/8-16 X 7.00"
PS-0310-00- Batter, Pinstripe, Clear, 10" Diameter
CS-0310-10- Batter, Controlled Sound, Clear 10" diam. black dot on top
TI-0310-00- Timpani, Clear 10" diam. for rototom
10-1871-10- Counterhoop, Batter, 10" Diameter, 6 Ears, 2.3mm Gauge, Chrome
ROTOTOM, BLACK, 12" DI
10-1400-39- Rototom, 11 1/2'' Diameter, Top Casting, Black
10-1500-39- Rototom, 13 1/2'' Diameter, Bottom Casting, Black
10-2200-09- Parts, Carriage Bolt, 3/8-16 X 5.50"
PS-0312-00- Batter, Pinstripe, Clear, 12" Diameter
CS-0312-10- Batter, Controlled Sound, Clear 12" diam. black dot on top
TI-0312-00- Timpani, Clear 12" diam. for rototom
10-1871-12- Counterhoop, Batter, 12" Diameter, 6 Ears, 2.3mm Gauge, Chrome
ROTOTOM, BLACK, 14" DI
10-1400-49- Rototom, 13 1/2'' Diameter, Top Casting, Black
10-1500-49- Rototom, 15 1/2'' Diameter, Bottom Casting, Black
10-2200-09- Parts, Carriage Bolt, 3/8-16 X 5.50"
PS-0314-00- Batter, Pinstripe, Clear, 14" Diameter
CS-0314-10- Batter, Controlled Sound, Clear 14" diam. black dot on top
TI-0314-00- Timpani, Clear 14" diam. for rototom
10-1872-14- Counterhoop, Batter, 14" Diameter, 8 Ears, 2.3mm Gauge, Chrome
Place the special order through your local or online retail store.
Published:
March 10, 2024
February 7, 2024
Updated:
March 11, 2024
Place the 4 segmented rings on top of the drumhead and form a circle. Lay the drum in a horizontal position with the drumhead facing up. Place the Tray over the Foam. Place the Counterhoop over the Tray. Add Claw Hooks and Tension Rods. Turn the drum over in the vertical playing position. Attach the Bass Drum Pedal. Product subject to change without notice. Visit Remo.com for more information.
Drumhead types are specific to the type of counter-hoop used on the drum. Drums with wooden counter-hoops, most common on bass drums, require a 'bass-type' drumhead which has a wide gauge aluminum flesh-hoop to properly seat and tune up. Drums that use metal counter-hoops, most common on snare and toms, require a non-bass drumhead which has a thinner gauge aluminum flesh-hoop to seat inside. Players have managed to interchange head types in some cases, but it's not likely nor recommended for optimum performance. *We also identify with the part #'s where the 3rd digit is '0' for snare/tom and '1' for bass use. For example: PINSTRIPE® CLEAR DRUMHEAD, 20" PS-0320-00 is for snare/tom style PS-1320-00 is for bass style.
Yes, drumheads for Premier model drums are still available for purchase. In the 1980's, Remo worked closely with Premier to develop tooling for 4 major sizes: Rack Toms- 10" (9-5/8" actual diameter), 12" (11-7/8" actual diameter); Floor Toms-16" (16-5/16" actual diameter); and Bass-20" (19-5/8" actual diameter). Please note: some Premier models were made outside of these 'standardized' sizes, and may require a full custom made-by-hand drumhead. If your measurements fall outside of these specs, please see custom drumhead link: https://support.remo.com/hc/en-us/articles/202362179-Custom-Drumheads If the inner-diameter of your current drumheads are consistent to the sizes listed above, choose from the following list and submit the special order with your local or online retail store. The retail store will provide price and estimated lead-time. BA-0110-PR- Batter, AMBASSADOR®, Coated, 9-5/8" Diameter BA-0112-PR- Batter, AMBASSADOR®, Coated, 11-7/8" Diameter BA-0116-PR- Batter, AMBASSADOR®, Coated, 16-5/16" Diameter BR-1120-PR- Bass, AMBASSADOR®, Coated, 19-5/8" Diameter BA-0310-PR- Batter, AMBASSADOR®, Clear, 9-5/8" Diameter BA-0312-PR- Batter, AMBASSADOR®, Clear, 11-7/8" Diameter BA-0316-PR- Batter, AMBASSADOR®, Clear, 16-5/16" Diameter BR-1320-PR- Bass, AMBASSADOR®, Clear, 19-5/8" Diameter
Telephone:
+1 (800) 525-5134Email Address:
support@remo.com