Search

Toca Conga Models using EasyPlay hoops: Drumhead Selection | Remo

Toca Conga Models using EasyPlay hoops: Drumhead Selection | Remo

What are the Remo Symmetry Conga drumhead options for Toca Conga models with EasyPlay hoops? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff. Toca Congas with EasyPlay hoops: Limited Edition, Custom Deluxe, Premiere, Custom Deluxe WoodDrum sizes 11", 11.75", 12.50"

Toca Conga Fiberglass: Drumhead Selection | Remo

Toca Conga Fiberglass: Drumhead Selection | Remo

What drumhead options does Remo provide for Toca fiberglass conga models? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff. Toca Congas Fiberglass model onlyDrum sizes 11", 11.75", 12.50"

Toca Conga Player Series: Drumhead Selection | Remo

Toca Conga Player Series: Drumhead Selection | Remo

What drumhead options does Remo offer for the Toca Conga Player Series? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff. Toca Congas: Player series. Drum sizes 10, 11"

Gon Bop Conga Models using Contour hoops: Drumhead Selection | Remo

Gon Bop Conga Models using Contour hoops: Drumhead Selection | Remo

What drumhead options does Remo offer for Gon Bop Conga models using Contour hoops? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff. Gon Bop Congas: California Series, Alex Acuna Series Special Addition Series, Alex Acuna Signature Series, Tumbao Pro Series, Mariano Series. Drum sizes 10,11,11.25,12.25, 12.50"

Pearl Conga Elite Series, Richie Flores: Drumhead Selection | Remo

Pearl Conga Elite Series, Richie Flores: Drumhead Selection | Remo

What are the Remo Symmetry Conga drumhead options for Pearl Congas in the Elite Series and Richie Flores models, and how do these options impact drum performance? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff. Pearl Congas: Elite Series, Richie FloresDrum sizes 11", 11.75", 12.50"

Gon Bop (old) Tumbao Model: Drumhead Selection | Remo

Gon Bop (old) Tumbao Model: Drumhead Selection | Remo

What are the Remo Symmetry Conga drumhead options for the Gon Bop Tumbao Model with traditional hoops - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff. Gon Bop Tumbao using Traditional hoops (fit may vary). Drum sizes 11,11.75",12.50"

Schallock Conga Model: Drumhead Selection | Remo

Schallock Conga Model: Drumhead Selection | Remo

What are the Remo Symmetry Conga drumhead options for the Schallock Conga Model? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff.

Pearl Conga Bobby Allende, Havana Series: Drumhead Selection | Remo

Pearl Conga Bobby Allende, Havana Series: Drumhead Selection | Remo

What drumhead options does Remo provide for the Pearl Conga Bobby Allende and Havana Series? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center at support@remo.com). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff. Pearl Congas: Bobby Allende, Havana SeriesDrum sizes 11", 11.75", 12.50"

Pearl Conga Primero Wood or Fiberglass: Drumhead Selection | Remo

Pearl Conga Primero Wood or Fiberglass: Drumhead Selection | Remo

What are the Remo Symmetry Conga drumhead options for the Pearl Conga Primero and Primero Pro Series - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e. playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff.

Bass vs Snare/Tom type Drumheads | Remo

Bass vs Snare/Tom type Drumheads | Remo

Can I use a tom style drumhead on my bass drum (visa versa)? - Drumhead types are specific to the type of counter-hoop used on the drum. Drums with wooden counter-hoops, most common on bass drums, require a 'bass-type' drumhead which has a wide gauge aluminum flesh-hoop to properly seat and tune up. Drums that use metal counter-hoops, most common on snare and toms, require a non-bass drumhead which has a thinner gauge aluminum flesh-hoop to seat inside. Players have managed to interchange head types in some cases, but it's not likely nor recommended for optimum performance. *We also identify with the part #'s where the 3rd digit is '0' for snare/tom and '1' for bass use. For example: PINSTRIPE® CLEAR DRUMHEAD, 20" PS-0320-00 is for snare/tom style PS-1320-00 is for bass style.

LP Conga Cosmic "CP", Performer, Ardiente, Caliente: Drumhead Selection | Remo

LP Conga Cosmic "CP", Performer, Ardiente, Caliente: Drumhead Selection | Remo

What drumhead options does Remo offer for LP Conga models such as Cosmic "CP", Performer, Ardiente, and Caliente, especially for those equipped with EZ Curve rims, and how do these selections enhance drum performance? - Remo Symmetry Conga drumheads are designed specifically for non-Remo model Congas equipped with the latest version 'contoured/radial' hoops, i.e rims, as a standard among conga manufacturers-beginning since the late 90's. (If you have traditional hoops or would prefer tucked conga drumheads, please see other knowledge base post to confirm if drumheads are available for your model or contact our support center). Symmetry drumheads are specifically engineered to conform to the shells bearing edge with tension for optimum tone, pitch stability, and projection. Denotation: 'D' in the model number, denotes the inner diameter (ID) of the Aluminum Ring. D1 being the smallest, D4 being the largest-all specific to the type/model of the drum. Note the Crown size, i.e.playing surface remains the same: 9.75", 10.75" 11.06", 11.25”, 11.75", 12.25” 12.50", 13”.Due to non-standardized conga drum manufacturing, drumhead fit may vary...make sure to center and level as you tension for optimum performance. All listed models have been fit tested by Remo staff.LP models using EZ Curve rims (4+ different set/sized models below).

Product Warranty | Remo

Product Warranty | Remo

Does Remo offer a Product Warranty? - At Remo, we stand behind all of our products. If you feel your product may be defective or fall under a warranty situation as a result of a manufacturing defect there are multiple service options available.• Return to store: If you have a specific retailer you enjoy shopping through you can return the item to the store. Remo retailers are knowledgeable and experienced in handling our products and in many cases can handle the situation themselves so you’re taken care of immediately.• Inside the U.S. claims can be emailed directly to Remo to support@remo.com and must include all of the information requested below.• Outside of the U.S. claims are handled through the Remo Authorized Dealer where the purchase was made. *Important Note: We cover shipping charges on warranty replacements only If the product was purchased through a music retailer located in your country of residence.

TOP
Contact Us
Accessibility Statement
Disclaimers
Jobs
Privacy Policy
Terms of Use
By clicking “Accept”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Privacy Policy for more information.
DenyAccept